Electromagnetic iMAG series Flow Meter

The iMAG-Series magnetic flow meter is the most economical flanged electromagnetic electromagnetic flow meter on the market. With electrodes designed to discourage fouling, it is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. (For 3” version, see iMAG 4600-300.) Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow.

iMAG-Series magnetic flowmeters are NSF-61 approved and are rated IP68 for applications where the meter may be operated under water to a depth of at least 10 feet (3 meters) continuously. The display can be meter mounted or remote, and both rate and total indication are standard.

Rate and total units and pulse scaling can be set via the front panel touch key pad by the user. Bidirectional flow is standard with forward, reverse and net flow. A power/output cable allows outputs for use with a variety of Seametrics and other displays and controls for remote reading and telemetry applications. Pulse output is standard on all models and 4-20mA passive current loop is standard on the iMAG 4700p. In addition, 4-20mA loop, HART protocol, high speed digital, and Modbus® protocol outputs are optional on the externally powered units, depending on model..

iMAG 4700 ( Base Compact)

The iMAG-Series are the most economical flanged electromagnetic flowmeters on the market. With electrodes designed to discourage fouling, it is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. (For 3” version, see iMAG 4600-300.) Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow. iMAG-Series meters are NSF-61

iMAG 4700P ( Premium Compact)

The iMAG-Series are the most economical flanged electromagnetic flowmeters on the market. With electrodes designed to discourage fouling, it is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. (For 3” version, see iMAG 4600-300.) Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow. iMAG-Series meters are NSF-61 approved and are rated IP68 for applications where the meter may be

iMAG4700r ( Remote)

The iMAG-Series are the most economical flanged electromagnetic flowmeters on the market. With electrodes designed to discourage fouling, it is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. (For 3” version, see iMAG 4600-300.) Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow. iMAG-Series meters are NSF-61 approved and are rated IP68 for applications where the meter may be

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake

Recent Posts
Archive
Search By Tags
Follow Us
  • Facebook Basic Square
  • Twitter Basic Square
  • Google+ Basic Square

Contact Us

Jln Satria Raya IV No. 7 BSK Kalimalang Bekasi 17144

Telp  081282084779

Email sales@wmablog.com

Blog :  www.wmablog.com | www.rudywinoto.com

We Accept

© 2018 by wiratama-ma.com

  • LinkedIn - Grey Circle
  • White Twitter Icon
  • White Facebook Icon
  • White Google+ Icon
  • White Instagram Icon
This site was designed with the
.com
website builder. Create your website today.
Start Now