Elektrogas Control Valves VRA, VLA, VTA

VRA VLA VTA

Solenoid valves for combustion air regulation

The VRA/VLA/VTA types are normally closed solenoid valves for cold combustion air regulation. When the coil is not energized the spring works on the disc, keeping the adjusted minimum passage of air. When powering the coil the valve opens, moving the disc to the maximum open position. When power is switched off the valve moves to the minimum position.

This type of device is suitable for high/low stage control of combustion air in industrial gas burners. (qualified for continuous service- 100% ED).

Material/Connections

AlSi : Rp3/4 … Rp2½

AlSi : DN40 … DN80

Operating pressure

0 … 200 mbar

Media temperature

Cold air 60°C max.

Settings

High/Low stage operation

VRA: 1s opening/closing

VLA: ~4s opening/1s closing

VTA: ~4s opening/closing

Bypass bore (optional)

flow meter, water meter, ultrasonic, electromagnetic, variable area, vortex, steam, air, water, udara, limbah, solar, oil, level sensor, air motor, hydraulic, pneumatic, pressure switch, flow sensor, connector, plug, receptacle, flow transmitter, portable, clamp on, wall mount, hand held, high pressure, gauge, battery, sensor, reflex, seal, cylinder, solenoid, regulator, valve, shaft, piston, clutch, brake

Advertisements