Insertion Flow Meters

EX80-Series

Fixed Depth Insertion Magmeter

• Low-flow performance and accuracy superior to any mechanical flow sensor

• No moving parts to wear out

• Dedicated fittings for simple installation

• Retainer clip automatically sets correct depth

EX100/200

The complete lack of moving parts of the EX100/200-Series insertion flow sensor is the source of its reliability. Brass and stainless steel models withstand a variety of temperature, pressure, and chemical conditions. The EX-Series has no rotor to stop turning in dirty water and there are no bearings to wear out.

IP80

The IP80-Series are impeller (or “paddlewheel”) insertion metersdesigned for use with a wide variety of liquids in pipe sizes 1/2″ to 8″. Sensors are available in brass, 316 stainless steel, PVC, and polypropylene. Bodies are machined from a solid rod for maximum precision. High-quality jewel bearings and nickel-bound tungsten carbide shafts are used for extreme low friction and long life.

IP100/200

The IP100/200-Series are adjustable depth insertion paddlewheels that come in brass or 316 stainless models

TX80

The TX80-Series are insertion turbine meters designed for use in 1-1/2″ to 8″ pipe. High-quality jewel bearings and precision shafts ensure long life and low friction. Available

in 316 stainless steel, brass, PVC and polyprolylene, sensor bodies are machined from solid rod for maximum low-flow performance. The TX80-Series use special fittings that ensure ease of installation and correct depth setting in the pipe.

TX100/200

The TX100/200-Series are adjustable depth insertion turbines

that come in brass or 316 stainless models to fit 3” to 48” pipe. Installation fittings are standard 1-1/2″ (101/201) or 2” (115/215) FNPT. Fittings such as saddles and weldolets

may be purchased either locally or from SeaMetrics.

Fittings for 80 Series