PE202 magmeter is designed for low-flow chemical injec-
tion or difficult-to-meter applications with pulsating metering
pumps in 3/4” to 1/4” pipe/tube. The housing is made of stur-
dy splashproof HDPE plastic.
With no moving parts, the PE202 can handle fluids contain-
ing particulate matter without clogging or jamming, keeping
maintenance at a minimum. With no metallic parts (100%
PVDF body and PVDF carbon fiber-filled electrodes), the me-
ter is corrosion-resistant and compatible with a wide range of
chemicals. Accuracy is maintained with conductive fluids (>20
microSiemens) of varying viscosities and densities.
The PE meter is compact enough to fit most pump/injection
systems. With zero straight pipe required after an elbow, it
can be easily mounted in tight spaces. The mounting bracket
adds stability.
The PE meter has an optoisolated current sinking pulse out-
put that can be connected to the Seametrics FT420 rate/total
display or FT520 batch processor, as well as an optoisolated
4-20 mA current loop for powering analog devices. Outputs
and power are provided through a 20 foot (6 meter) cable with
8-pin female circular connector.
Electromagnetic Flow Meter low flow 3/4 Inch PE202-75 + FT440W
- Chemical injection
- Corrosive materials
- Low flow applications
- Pulsating flows (e.g., metering pump)
- Type : Electromagnetic
- Power : 10 - 15 VDC(PE),7 – 30 VDC(FT)
- Size : 3/4”
- Flow Range : 6 m/S
- Instalation : ½” male NPT (PE202-075),Wall mount (FT440W)
- Fitting : 1/2“ NPT fittings standard in 3/4” or 3/8” flowbody. NPT threaded adapters available for above pipe sizes
- Flange : -
- Liner : -
- Temperature : 0 ~ 93°c
- Preassure : 10.3 bar
- Accuracy : 1 %
- Material : PVDF
- Electrode : PVDF Carbon fiber filled
- Output : Pulse, 4~20 mA Loop